RAUDRIL Rail part-filter pipes and general-purpose pipes comply with the DIN 4262-1, C2. They are particularly suitable for the application in the areas subject to dynamic loads (construction of road and airport) and in areas with cover and surface loads (landfills, underground car parks). Frequent flushing of the pipes as well as bedding and backfilling with coarse-grained material cannot damage the PVC compact pipes.
RAUDRIL Rail drainage pipe
Smooth inner wall guarantees high seeping and discharge rate and prevents clogging and decomposition
High water absorption capability and excellent discharge values
Up to 10% more water absorption than smooth pipe through transverse slots in connection with longitudinal grooves
Simple pipe connection with 5 m lengths with integrally-moulded socket and comprehensive range of fittings
Good bearing surface and high installation safety with tunnel shape
High pressure flushing up to 150 bar, with new procedure higher flushing pressures are possible
Standard dimensions of part-filter DN 100 and 160, general-purpose DN 200, 250, 355
Slot pattern of part-filter: transverse slotted, offset rows of slot spread over 220° of the pipe crown
Slot pattern of general-purpose: transverse slotted, offset rows of slot spread over 107° of the pipe crown
Standard slot width: 1.2 mm
Water admission area > 50 cm²/m
Statically calculable according to ATV – DVWK – A 127
Colour: azure
Part-filter pipes DN 100 and 160
General-purpose pipes DN 200, 250, 355, sealed with roll ring
Fitting range (double-socket couplings, sleeve couplers, elbows, branches 45°, branches 90°, adapters to KG, reducers, end caps, outlet pieces with cover, shaft lining, sealing rings)
RAUDRIL inspection shaft DN 315 made from PVC. 3 outlets RAUDRIL DN 160 with socket, 90° apart. With grit chamber
RAURECO recycling inspection shaft with integrated RAUDRIL shaft lining. Refer to product "RAURECO recycling inspection shaft DN 625"