in  go

Login Customer Portal

Login
 

RAUDUCT Multiple sub-duct pipes

For an optimum use of the cable duct cross sections

RAUDUCT Multiple sub-duct systems consist of 2 to 5 PE ducts bound together by a seamless, contour hugging PE casing. The use of PE for both the inner ducts as well as the casing results in a flexible system. The system is gastight and watertight. Further cables can be added easily to existing networks with free ducts by using the RAUDUCT system. Due to these possibilities there are no civil engineering costs for installation of new cables, the highest cost factor. The REHAU inner grooves additionally make blowing-in cables very simple.
RAUDUCT Multiple sub-duct pipes RAUDUCT Multiple sub-duct pipe
RAUDUCT Multiple sub-duct pipes offer the following advantages:
  • further cables can easily be added to existing networks with free ducts, including existing RAUDUCT system ducts
  • the special REHAU inner grooves and the specially dimensioned cross section facilitate blowing the new cable in so that the entire cross section of the duct is able to be utilised at little expense
  • no excavation costs for installing new cables
  • because every cable has its own internal duct it is easy to identify the cables. When routes are newly rented any cables already installed can thus be easily removed and replaced with cables belonging to the new tenant. It is possible to modify network with more efficient cables.
RAUDUCT Multiple sub-duct pipes are offered with the following cross sections:
  • RAUDUCT 5-way: 1 pipe 40x2,0, 2 pipes 32x2,0, 2 pipes 25x2,0
  • RAUDUCT 4-way: 2 pipes 40x2,0, 2 pipes 32x2,0
  • RAUDUCT 4-way 32: 4 pipes 32x2,0
  • RAUDUCT 3-way big: 1 pipe 50x2,5, 2 pipes 40x2,0
  • RAUDUCT 3-way klein: 1 pipe 40x2,0, 2 pipes 32x2,0
  • RAUDUCT 3-way 32: 3 pipes 32x2,0
  • RAUDUCT 3-way 40: 3 pipes 40x2,0
  • Other cross sections on request
Besides the RAUDUCT multiple sub-duct pipes we offer the folowing system components:
  • Push-fit connector
  • End fitting and sealing caps
  • splittable sealing plug between pipe and cable
  • splittable sealing plugs
  • repair half-pipes, repair sets
  • chamfering tool, dismantling shells for connectors, pipe cutters
  • Vario blowing-in tool for pipe diameters d 25 upto d 50
  • pneumatic cable pushing tool
Technical Information RAUDUCT4277 kb
For more information

Use this contact form for more information about RAUDUCT Multiple sub-duct pipes.

export.rehau.com:  Construction > Civil Engineering & Infrastructure > Cable Protection Systems > RAUDUCT Multiple sub-duct pipes
© REHAU AG + Co, 2008
© REHAU AG + Co, 2008