• RAUTITAN Piping System Introduction
• RAUTITAN Fittings and Jointing Technique
• RAUTITAN Domestic Drinking Water, Hot and Cold Water Service
• RAUTITAN Radiator Connecting Systems
• RAUTHERM S - Sub-Surface Heating and Cooling
• RAUPEX - Industrial Piping System
• RAUTOOL - Mounting Tools for Compression Sleeve Jointing Technique
• RAUPIANO Plus - Sound Absorbing Domestic Soil and Waste Water System

RAUPEX - Industrial Piping System

Ideal for the distribution of compressed air, cooling water and non-flammable gases

 

The RAUPEX industrial pipe system meets the requirements of the industry for safe and complete system solutions. It offers an extensive assortment of differently coloured pipes, fittings, tools, and other accessories.

• Ideal for the distribution of compressed air, cooling water and many other industrial applications.
• Universal system with two pressure stages up to a maximum of 25 bar
• Clear marking of the pipes according to the media flowing (DIN 2403)
• Application area between -40° and 95 °C
• Available as coil and bar

• no leaks, no loss of energy
• fast installation
• corrosion-free --> maintenance free
• suitable for transport of solids
• resistant to many chemicals
• operates between - 40°C to 95° centigrade - subject to applied pressure
• no cracks caused by tension
• environmentally friendly due to the low consumption of energy during manufacturing
• free of heavy metals, halogens and paint deteriorating particles
• slow ageing
• large range of diameters from 16 to 160 mm
• colouring according to DIN 2403
• later expansion of system possible due to saddle fittings

With the RAUPEX industrial pipe system REHAU offers a complete system consisting of:

• RAUPEX Pipe (Colours according to DIN 2403):
  - Dimensions 20 x 1,9 up to 160 x 14,6 (SDR 11)
  - Dimensions 16 x 2,2 up to 63 x 8,6 (SDR 7,4)
  
• Wide fitting range of joining techniques:
  - REHAU Compression sleeve
  - FUSAPEX electrofusion socket made of PEX
  - REHAU electrofusion socket made of PE
  
• REHAU ball valves
• Accessories for compressed air applications
• Tools

Application & Recognition
DIN 2403 recommends the colour coding of pipework in order to avoid confusion and for ease of identification.


RAUPEX-A for compressed air
REHAU compression sleeve and electrofusion fittings allow for distribution without losses caused by leaks. As the system is corrosion-free no additional filters are necessary.

RAUPEX-K for cooling water
It puts an end to corrosion and encrustation - problems that can lead to disruption of the production process.

RAUPEX-UV for non flammable gases and outdoor applications
DIN 2403 recommends that black pipe be used for the transportation of liquids other than water, acids and alkalis. Due to its opacity barrier RAUPEX-UP can also be used for outdoor applications.

RAUPEX-O
Coloured blue, is suitable for compressed air. The REHAU compression sleeve and electrofusion fittings allow for distribution without losses caused by leaks.

RAUTHERM-FW for industrial heating
Large industrial buildings require large amounts of heat. For this application our RAUTHERM-FW pipe is available with compression sleeve fittings in sizes of up to 110 x 10 mm.

• RAUPEX-A:colour: grey; Recomended Application: compressed air
• RAUPEX-K:colour: green; Recomended Application: cooling water
• RAUPEX-O:colour:blue; Recomended Application: compressed air (international)
• RAUPEX-UV:colour:black; Recomended Application: outdoor applications
• RAUTHERM-FW:colour:red; Recomended Application: industrial heating

	RAUPEX Intro Brochure 876700	762 kb
	RAUPEX Technical Information Manual 87660...	2604 kb
	Balmoral Spa	197 kb